Food Radio

Created a ‘Food Radio‘ for Maija Demitere. For years she has been photographing everything she eats. I’ve analyzed a year worth of photos (+- 1500) and extracted the 5 most dominant...

RPi Zero Timelapse

Designed and laser cut a small acrylic board to house both the Raspberry Pi Zero and HQ Camera module. At the moment it’s making a timelapse of sprouting basil plants.

E-ink display // update 7

Made a new housing for the e-paper display. This time in portrait mode with mounting holes for the Raspberry Pi and Arduino. Because of the limitations of my laser cutter I...

RPi Camera // update 1

Made a small casing for the Raspberry Pi and HQ Camera Module. It opens via a small latch and its i/o is still accessible. Oh and it’s transparent.

Tomato/Potato calculator // update 1

Designed a small prototype of the T/P calculator Maija Demitere has come up with. Needed a way to differentiate between different ‘puzzle pieces’ being laid down in a hexagonal grid. Decided to put...

RPi Camera // update #

Testing out the timelapse capabilities of the Raspberry Pi in combination with the HQ camera module (and a 6mm wide-angle lens). The subjects are some sprouting buckwheat seeds.

Brainwaves sequencer // update 1

Started collaborating with Ieva Viksne and her brainwave-scanning-performance. Below is a quick prototype where the intensity of incoming brain waves are translated into drum patterns.

E-ink display // update 6

The e-ink display needed a better housing solution. Designed in Fusion 360 and laser cut with my Beamo laser cutter. Looks great and has some space to hold the Raspberry Pi...

180 Camera Holder // update 1

Whenever I make a 180° stereoscopic picture with our Vuze camera, my fingers are in the frame. Hence, I designed a construction to hold the camera and made a little pull...

Garage domotica // update 3

Installed the Arduino powered relay modules and connected them to 8 LED ceiling lights. The relayboard is mounted on a laser cut piece of wood together with an Arduino Mega. And...

Garage domotica // update 2

Problem: install an Apple Airport in the electrical panel in the garage. The panel uses DIN-rails to mount electrical components. Solution: design and laser cut a mounting bracket.

E-ink display // update 5

Why not just use this cool e-ink display as the raspberry pi’s main monitor? Sure, the framerate is not e-sports ready but it’s great for picture viewing.

Garage domotica // update 1

We are renovating our old garage. Taking out the junk and building a workshop/makerspace/exhibition-room. We installed 16 ceiling LED lights which will be controlled from a tablet. Made a small prototype...

E-ink display // update 3

Using both full and partial updates on the e-ink display. So far the modules I’m using seem to accept both .bmp, .jpg and .png. Next, I’ll experiment with text and shapes.

E-ink display // update 1

Bought an 9.7″ e-ink display from WaveShare. It included a HAT for the Raspberry Pi that includes the controller. WaveShare supplies a demo code that clears the display, shows the 16...

Aquaponics // update 1

Constructed an aquaponics setup. Made from simple plastic construction materials and cheap grow lights (LED) from china. Water gets pumped up from the fish-inhabited-aquarium (or a bathtub in this case) to...

SWIM: Sound Wonder Interactive Mobile

SWIM is an interactive installation where visitors can discover sound in a wonderful world. By creating connections between the hanging elements the world becomes alive, both in light and sound. The...